Startup:

1. Press the 'Scenes' button. Select 'All Scenes' tab at top and make sure 'WBS' scene has a play symbol next to it. If not, touch 'WBS' and click the 'Go' button.
2. In the middle bank of faders ('Bank 2'), select 'Layer A'. All of the channels you need are shown there.
3. Mute and unmute mics as needed (Addie=Singing Mic, ANNC=Announcements, Spare=Speaker's Headset, ACG2= Addie's Guitar, Pro1=Video Sound, Pads=Tracks from Addie's Phone )

Shutdown:

1. Mute all mic and guitar channels

Startup:

1. Open Propresenter. It's the orange icon in the dock at the bottom of the screen. (this might take a bit, it has to scan the files as it opens) 
2. In the top left corner of the screen, find the document named 'WBS' or 'Women's Bible Study' and click on it.
3. Below that on the left side of the screen you will find all of the documents and songs for the day. Click on one to navigate into the playlist.
4. Go ahead and click on the logo slide in the 'WBS Welcome' document
5. On the Crestron touchscreen, touch the display to wake it up and touch it again (if its a black screen showing just the logo) to get rid of the screen saver.
6. Press on the 'Projectors' tab on the left and press the 'Power On' button for each of the 3 projectors.

Shutdown:

1. On the 'Projectors' tab of the Crestron touch panel, press the 'Power Off' button for each of the projectors.

Startup:

1. Reach around the back left side of the Lighting Board. Right above the power cable is the power switch. Flip it on. (if you don't see the displays come on and it start to boot up then flip it the other way)
2. When it finishes booting it will show a start screen. Press the 'Start show' button.
3. The show will load.
4. Push fader 4 all the way up and press the play button above it until 'WBS' is the top selection (aka current cue).